Mississauga Home Comfort

NR-210A Tankless Water Heater

Features:

Ultra Condensing Efficiency

  • Boasts one of the industry’s highest ratings of 0.96 DOE energy factor.
  • Low annual operating costs and the best value and payback.

Extended Lifecycle

  • Dual stainless steel heat exchangers provide longer life expectancy and more resistance to erosion than copper heat exchangers used in other water heaters.

Navien Technology is Eco Friendly

  • The Eco Pre-mixed burner dramatically reduces NOx emission levels.
  • Boast the lowest emission levels in the industry.
  • Each Navien unit installed equates t0 31 cypress tress.

Inexpensive PVC venting solution

  • Lower exhaust temperatures allow for the use of 3” SCH 40 PVC venting.
  • Offers significant cost savings when compared with other venting materials.
  • Reduces installation time and makes it easy to run a 100 feet of venting.

Enhanced Safety with Dual Microprocessors

  • Two microprocessors offer better control and safe operation.
  • Not only control the burner for ideal combustion but also maintain the steady hot water temperature.

Optimal and Stable Combustion with APS and GPS

  • APS (Air Pressure Sensor) maximizes combustion efficiency by sensing and controlling the air required for optimal combustion.
  • GPS (Gas Pressure Sensor) offers stable combustion by sensing gas pressure and controlling the fan speed to maintain optimal combustion.

Leak Detector

  • Prevents damages to water heaters as well as personal property.

Space Saving Design

  • The wall mount design occupies approximately 80% less space than a traditional 50 gallon tank-type water heaters.

 

  • Eliminates minimum flow rate requirement with optional internal circulation mode.
  • Minimize hot/cold/hot stacking, the so called “Cold Water Sandwich.”
  • Saves water with the reduced time to get hot water.
  • Saves on installation costs with built-in circulation pump and buffer tank.

 

 

Specification:

 

 

 

Data Field

NR-210A

Heat Capacity (Input)

Min: 17,000 Btu/hr Max: 180,000 Btu/hr

Energy Factor (DOE)

Natural Gas

0.94

Propane Gas

0.94

Dimensions (W x H x D )

17” × 28” × 15”

Weight

NR-A

86 lbs

NR

77 lbs

Installation Type

Indoor /Outdoor Wall-Hung

Venting Type

Forced Direct Vent

Ignition

Electronic Ignition

Water Pressure ( min-max)

15 - 150 PSI

Gas Supply Pressure (from source:min-max)

Natural Gas

5.0”W.C. ~ 10.5”W.C.

Propane Gas

8.0”W.C. ~ 13.5”W.C.

Minimum Flow Rate to activate Water Heater

No minimum flow rate requirement.

Connection Sizes

Cold Water Inlet

3/4” NPT

Hot Water Outlet

3/4” NPT

Gas Inlet

3/4” NPT

Power Supply

Main Supply

120VAC, 60Hz 200W (max 2A)

Heat Exchangers

Primary Heat Exchanger: Stainless Steel Condensing Heat Exchanger: Stainless Steel

Venting (0” Clearance)

Exhaust (ø3”)

SCH 40 3" PVC, 3"Polypropylene, SCH 80 3" CPVC

Intake (ø3”)

PVC, Flex Aluminum, Flex Stainless Steel, ABS


For more information please contact us.

Specials

Visit us on Facebook.

Visit Us On Facebook!

To connect with and learn more about MHC Home Comfort, visit us on Facebook.

Contact Form

Contact form submitted! We will be in touch soon.